7. Food factory

Sensor Signal Input to PLC:
Signal conditioners are used to process measured signals at the front end of PLC system.
Typically they convert sensor specific signals into standard instrumentation signals, provide limit alarm contact outputs, or apply simple math functions such as ratio calculation.

Years:

5. GreenHouses

Temperature Log and Monitoring of Greenhouses:
Sophisticated agricultural management for greenhouse cultivation requires good control of temperature monitoring and recording. Paperless recorders that support network connection provide an economical solution that cover multi-point temperature logs in large greenhouses. The DL8 Series Web Data Logger sends out e-mail notification to cellular phones when it detects high temperature in a
greenhouse.

Years:

4. Distribution Reservoirs

Remote Monitoring of Distribution Reservoir(s)
Service water filtered at a water purification plant is typically lifted up to a distribution reservoir, then re-distributed downstream by gravity power for domestic use.
The DL8 Series Web Data Loggers provide a monitoring system for distribution reservoirs, most of which are unmanned during operation.

Years:

1. Photovoltaic Generation

Lightning Surge Protection for Photovoltaic Systems

Years:

2. Wind Power Generation

Turbine Blade Angle Detection and Power Output Determination

Years:

3. Highway, Railroad system

Power Monitoring Systems for Railroad Stations or Motorway Service Stations
Power monitoring systems are implemented for efficient use of energy in railroad
stations and motorway service stations, where power transducers and multi power
monitors are used.

Years:

ACE Group (Automation-Communication-Electric)

*Hochiminh city: ACE NewTech Co.,Ltd.
12FL, Viettel Complex Building, 285 CMT8 st., Ward 12, Dist 10, HCMC, Vietnam. Email: info@ace.com.vn
*Hanoi capital: ACE Hanoi JSC.
Unit A902, Lilama Tower, 124 Minh Khai st., HaiBaTrung Dist, Hanoi, Vietnam. Email: acehanoi@ace.com.vn

Video | Terms of use | Privacy policy

035.2701981

7. Food factory

Sensor Signal Input to PLC: Signal conditioners are used to process measured signals at the front end of PLC system. Typically they convert sensor specific signals into standard instrumentation signals, provide limit alarm contact outputs, or apply simple math functions such as ratio calculation.

5. GreenHouses

4. Distribution Reservoirs

1. Photovoltaic Generation

Lightning Surge Protection for Photovoltaic Systems

2. Wind Power Generation

Turbine Blade Angle Detection and Power Output Determination

3. Highway, Railroad system

Power Monitoring Systems for Railroad Stations or Motorway Service Stations Power monitoring systems are implemented for efficient use of energy in railroad stations and motorway service stations, where power transducers and multi power monitors are used.

Sensor Signal Input to PLC:
Signal conditioners are used to process measured signals at the front end of PLC system.
Typically they convert sensor specific signals into standard instrumentation signals, provide limit alarm contact outputs, or apply simple math functions such as ratio calculation.

Power Monitoring Systems for Railroad Stations or Motorway Service Stations
Power monitoring systems are implemented for efficient use of energy in railroad
stations and motorway service stations, where power transducers and multi power
monitors are used.